Здравствуйте
я рассчитываю проточную часть насоса
расчёт прошёл нормально вроде бы всё получилось
при загрузке cfx post выдаёт предложение запустить pump impeller report
после запуска рисуются красивые картинки распределения скоростей и давлений в проточной части и где то через пару минут выдаётся такая ошибка



SEVERE
Operation 'Stream Blade LE' failed with unrecognized exception.
SEVERE
Operation 'Stream Blade TE' failed with unrecognized exception.
SEVERE
Operation 'Spanwise Plot of Alpha at LE Line' failed with unrecognized exception.
ERROR
Cannot evaluate 'minVal' on 'Spanwise Plot of Alpha at LE Line' as it does not have points.
ERROR
Evaluation of 'minVal(Velocity Alpha ACA on Spanwise Plot of Alpha at LE Line)@Spanwise Plot of Alpha at LE Line' is undefined.
ERROR
Cannot evaluate 'maxVal' on 'Spanwise Plot of Alpha at LE Line' as it does not have points.
ERROR
Evaluation of 'maxVal(Velocity Alpha ACA on Spanwise Plot of Alpha at LE Line)@Spanwise Plot of Alpha at LE Line' is undefined.
SEVERE
Operation 'Spanwise Plot of Beta at LE Line' failed with unrecognized exception.
ERROR
Cannot evaluate 'minVal' on 'Spanwise Plot of Beta at LE Line' as it does not have points.
ERROR
Evaluation of 'minVal(Velocity Beta ACA on Spanwise Plot of Beta at LE Line)@Spanwise Plot of Beta at LE Line' is undefined.
ERROR
Cannot evaluate 'maxVal' on 'Spanwise Plot of Beta at LE Line' as it does not have points.
ERROR
Evaluation of 'maxVal(Velocity Beta ACA on Spanwise Plot of Beta at LE Line)@Spanwise Plot of Beta at LE Line' is undefined.
SEVERE
Operation 'Spanwise Plot of Alpha at TE Line' failed with unrecognized exception.
ERROR
Cannot evaluate 'minVal' on 'Spanwise Plot of Alpha at TE Line' as it does not have points.
ERROR
Evaluation of 'minVal(Velocity Alpha ACA on Spanwise Plot of Alpha at TE Line)@Spanwise Plot of Alpha at TE Line' is undefined.
ERROR
Cannot evaluate 'maxVal' on 'Spanwise Plot of Alpha at TE Line' as it does not have points.
ERROR
Evaluation of 'maxVal(Velocity Alpha ACA on Spanwise Plot of Alpha at TE Line)@Spanwise Plot of Alpha at TE Line' is undefined.
SEVERE
Operation 'Spanwise Plot of Beta at TE Line' failed with unrecognized exception.
ERROR
Cannot evaluate 'minVal' on 'Spanwise Plot of Beta at TE Line' as it does not have points.
ERROR
Evaluation of 'minVal(Velocity Beta ACA on Spanwise Plot of Beta at TE Line)@Spanwise Plot of Beta at TE Line' is undefined.
ERROR
Cannot evaluate 'maxVal' on 'Spanwise Plot of Beta at TE Line' as it does not have points.
ERROR
Evaluation of 'maxVal(Velocity Beta ACA on Spanwise Plot of Beta at TE Line)@Spanwise Plot of Beta at TE Line' is undefined.
SEVERE
Operation 'Meridional Pt LE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional Pt TE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional Ptr LE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional Ptr TE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional W LE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional W TE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional Cm LE Line' failed with unrecognized exception.
SEVERE
Operation 'Meridional Cm TE Line' failed with unrecognized exception.
SEVERE
Operation 'Contour of Pt Stream Blade LE Surface' failed with unrecognized exception.
ERROR
Cannot evaluate 'minVal' on 'Contour of Pt Stream Blade LE Surface' as it does not have points.
ERROR
Evaluation of 'minVal(Total Pressure in Stn Frame)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
Cannot evaluate 'maxVal' on 'Contour of Pt Stream Blade LE Surface' as it does not have points.
ERROR
Evaluation of 'maxVal(Total Pressure in Stn Frame)@Contour of Pt Stream Blade LE Surface' is undefined.
WARNING
Invalid colouring range for 'Contour of Pt Stream Blade LE':
Minimum is greater than or equal to maximum.
ERROR
Cannot evaluate 'areaAve' on 'Contour of Pt Stream Blade LE Surface' as it does not have 2D faces.
ERROR
Evaluation of 'areaAve(X)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
Evaluation of 'areaAve(Y)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
Evaluation of 'areaAve(Z)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
Evaluation of 'areaAve(Normal X)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
Evaluation of 'areaAve(Normal Y)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
Evaluation of 'areaAve(Normal Z)@Contour of Pt Stream Blade LE Surface' is undefined.
ERROR
CCL parser failed with message:
Perl Syntax errors detected:
Illegal division by zero at (eval 128) line 2318.


подскажите пожалуйста как с этим бороться
перед этим был проведён расчёт той же проточной части абсолютно той же геометрии но на более грубой сетке и всё вроде бы посчиталось и нарисовалось без проблем

можно ли как нибудь остановить составление этого отчёта до возникновения ошибки чтобы все картинки и диаграммы построенные им до этого остались? а то после возникновения ошибки всё пропадает

и, извиняюсь за глупый вопрос, что такое ТЕ и LЕ line?

Жена с претензией мужу:
- Почему все твои друзья зарабатывают больше тебя!?
- Уметь надо - друзей выбирать.

Понравился анекдот - заходи на сайт rainfinity.ru/biznes-suveniry/sublimacziya.html